There are a few methods for joining magnet wire, depending on the type of magnet wire you are using and the strength of the connection required.

The following are several common methods of connecting enameled wires:

1.Soldering connections: If you are using metal magnet wire, consider using a soldering method to connect the enameled wires. Using a soldering iron or welding tool, heat the ends of the two enameled wires and connect them using appropriate solder. This method provides a strong connection but requires some soldering skills.
2.Wound connection: You can bend the two ends of the magnet wire into hook shapes, then cross them with each other, wind them together, and finally wrap the connection with insulating tape or other insulating materials. This method is suitable for soft magnet wires, but the connection strength may be relatively low.
3.Splice Connectors: Special magnet wire connectors or splices are available, often with a threaded or crimp design that allow for a simple and secure connection between two magnet wires. This method is suitable for situations where detachable connections are required.
4.Crimping terminal connection: Some crimping terminals or wire connectors are designed to clamp the magnet wire, and the magnet wire can be connected by manual compression. This method can also provide a stronger connection, but you need to ensure that the terminal clamps the magnet wire well.
5.Mechanical Connectors: Some mechanical connectors are designed specifically for connecting enameled wires. These connectors can provide a reliable electrical connection and ensure a secure connection.

When choosing a method for connecting magnet wire, consider the firmness, detachability, and electrical characteristics of the connection based on your specific situation and needs. No matter which method you use, be sure to make sure your connections are safe and secure to avoid circuit failures or other problems. At the same time, try to choose tools or connectors specially designed for connecting magnet wires to ensure the best connection effect.